Horton Products - DM Advantage™ / Reman On/Off Fan Drives

DM Advantage™

DriveMaster®

Arctis

Stratis®

Stratis Di

VMaster®

VMaster Di

WindMaster Revolution™

WindMaster®

WindShift™

Shogun™

HT/S Advantage™

HT650®

EC600™/EC450®

MSC2®

PolarForce™

Klondike Series®

HG300™

Roller Bushings

Reman On/Off Fan Drives

Upgrade to the higher-torque and ingenuity of the DM Advantage On/Off Fan Drive for less than you might imagine. The DM Advantage Reman is a price-conscious unit that’s remanufactured with genuine Horton parts and engineering. It comes with our solid warranty and passes the rigorous testing required to earn the Horton name.

Benefits

- Affordable and tested
- Maximum reliability
- Improved fuel savings
- Reduced noise
- Better engine performance
- Engine coolant temperatures kept at optimum operating efficiency
- Increased reliability in high-horsepower applications
- Easy to install and maintain

Features

DM Advantage superior design means better cooling and lower operating costs with a longer service life. DM Advantage Reman uses genuine Horton parts.

- Premium sheave bearing
- Improved air cartridge
- Long-wearing friction liner
- Spring-engaged and air-disengaged
- Lighter
- High torque for turning larger fans
- Fail-safe design
- Low parts count for simplicity

Applications

- Heavy-duty trucks
- Medium-duty trucks

Specifications

Actuation:	Spring-engaged, air disengaged
Minimum air pressure to disengage:	90 psi [620.5 KPA]
Out of box torque:	2400 in.-lbs. [271 N-m]
Friction disc diameter:	7.9 in. [200.6 mm]
Fan blade capacity (diameter):	32 in. [813 mm]
Engine horsepower range:	250-600 HP [186-447 KW]
Friction liner wear limit, minimum thickness:	0.23 in. [5.76 mm]

Premium Bearing vs. Groove Hub Bearing

DM Advantage Bearing • 14 rolling elements per row • Highest load capacity • High contact angle – withstands more thrust load • Dual-lip Viton® seals • Highly heat-resistant grease • Size: 45 mm ID x 85 mm OD x 39 mm length
Previous Technology • Deep groove bearings (2 needed) • 10 rolling elements per row • Preloaded to increase stiffness • Dual-lip Viton seals • Size: 45 mm ID x 85 mm OD x 19 mm length
Competitive Rear (Current Hub Bearing) • Deep groove bearings • 9 rolling elements per row • Low load capacity • Not preloaded • Size: 45 mm ID x 85 mm OD x 19 mm length
Competitive Front (Current Hub Bearing) • Deep groove bearings • 9 rolling elements • Not preloaded • Lowest load capacity • Size: 35 mm ID x 72 mm OD x 17 mm length